Maintaining your planer is an essential step towards making it last for a longer time. If you don’t take care of your planer properly, then you are going to likely end up with a broken planer or a dull planer which won’t be able to cut your board efficiently. You need to keep a regular check on your planer and ensure that it is not wearing down anytime soon. If you notice any issue with your planer, you need to get it fixed immediately. If you are looking for a new planer, here is the list of best planer 2017. So, here are a few ways in which you can take care of your planer to ensure a longer use for it:
- Clean your planer regularly
One of the best ways to take care of your planer is by making sure that it is cleaned regularly. If you use a mineral spirit and a soft cloth, then you can clean up the grease and the sap which is left behind while sniping a board. Before you start cleaning with the spirit, you need to get rid of all the debris from the cutter heads, rollers, etc. with the help of compressed air and brass-bristled brush. Once this is done, you can clean the roller with mineral spirit and then use paraffin wax to smoothen the planer.
- Remove the debris from the rollers and the surface after every use
Another thing which you need to do regularly is to blow the debris away from the planer rollers and surface to ensure it is free of any such small particles. This will help in preventing roller feed slips and will ensure that your boards don’t have any weird patterns due to the feed rollers pressing the chips or the nails against the working board.
- Check your motor brushes constantly
Another thing which you need to pay attention to is the motor brushes of your planer for any sign of wear or tear. You need to inspect it after every 100 hours for any signs of wear on the carbon faces and if you see some sign of overuse, then you need to replace it with carbon which is less than ¼ inch long. Sometimes due to constant motor use, which is caused due to the deep cuts in the wide stock, the planer could start wearing down quickly so ensure that the carbon is always new and not being overused.
- Sharpen the knives at the first sign of dulling
If you don’t keep your knives sharpened, then your planer might end up tearing a small part of the wood which you are working on instead of just cutting it up. This happens because the knives become dull and get stuck into the wooden boards and this problem can only be avoided by keeping your knives sharpened at all time. You need to replace your dull knives if you have a double-edged, disposable planer knife as it will save you a lot of time. So, maintain your planer knives to have an efficient and quick cut every time you use it.